V15 AF - Almost Finished V Groove Panels NEW

 NEW 9 and 12mm Almost Finished V Groove Panels, part of Plankwall's Building Panel System (BPS)

Grooves at 150mm Centres
Almost Finished panels have 2 UV paint coats on the front face and one on the back, making the panel moisture resistant.
While a final coat of paint is recommended, in some cases the panel can be left as finished depending on circumstances.
Interlocking "tongue and groove" sides for seamless panel joins.
For internal use.

Codes: VG09/24MDF150AF
             VG09/27MDF150AF
             VG09/36MDF150AF
             VG12/24MDF150AF
             VG12/27MDF150AF
             VG12/36MDF150AF

Both V and W groove are machined using blades. The blades importantly press grain down when machining making the groove nice and smooth and not raising and roughing the grain by a rotating router 

Description

Plankwall exclusively use Nelson Pine Golden edge Standard E0 panels. Use of their PanelBrace system appraisal. Can be used as part of the bracing structure under Branz appraisal 779 so long as installed as per NPIL specifications and Installation Guidelines. This now includes the use of gunned finish nails or Staples which speeds up installation and reduces the amount and size of filling required to finish.

 https://www.branz.co.nz/appraisal-codemark-certificates/779-2018-goldenedge-mdf-panelbrace-wall-bracing-systems/

Technical and Sustainability

E Zero